Fire Stop Silicone Sealant
About this item
Dolphin Fire Stop Silicone Sealant is a single component, neutral cure, gun-grade fire stopping sealant. It is an elastomeric, high performance sealant capable of meeting the joint movement requirements in a fire-rated joint. Dolphin Fire Stop is tested for up to 4 hours fire rating at independent laboratories and is approved for both through penetrations and joint applications.
Applications Area:
Steel, Copper and EMT Pipes
Fiberglass pipe insulation
Construction joints:
Cables Building Assemblies
Concrete and CMU
Gypsum Wallboard
Application Instructions:
Application surfaces should be dry and dust, rust, and grease-free. Cut the nozzle at an angle of 45° and apply sealant to a substrate. Tool immediately to spread the sealant against the surface to give it a smooth finish. For additional information, please consult the corresponding product data sheets.
Precautions:
Not for use in stoves, fireplaces or other areas routinely exposed to high heat or flames, recommended only for use in passive fire containment systems. Do not allow product to freeze. An uncured sealant may irritate eyes, respiratory system and skin. In case of direct contact, rinse immediately with water. It is recommended to use the product only in a well-ventilated place. Do not ingest. Keep out of reach of children.
Storage & Shelf Life:
12 months in unopened packaging in a dry and cool storage place, at temperature +30°C or below.
Reviews
There are no reviews yet.